Wiring system advice

[skiing1005]

hi again
Sounds good…Can you send us a link of where I can the stuff I need..I basically have 4 led lights . 2 switches one for 2 lights…Is this a simple setup to do ?

Is there somewhere on the net that has a good diagram for this.

Sorry about the basic questions, always learning!

[skiing1005]

hi again
Sounds good…Can you send us a link of where I can the stuff I need..I basically have 4 led lights . 2 switches one for 2 lights…Is this a simple setup to do ?

Is there somewhere on the net that has a good diagram for this.

Sorry about the basic questions, always learning!

[Darren]

HiIf you have the LEDs and

Hi

 

If you have the LEDs and the switches you just need the cable.

 

Below is a diagram on how to wire the 4 LEDS to use 2 switches.

 

 

Here is a description of the circuit:

1. + from the battery to a connector block (fuse first ideally)

2. Connector block splits the wire to 2 wires for each switch

3. + wires to switches, 1 switch per 2 LEDs

4. + wires to LEDS

5. – wire from LED to connector block

6. – connector block to battery –

 

I would recommend putting a fuse between the battery + and the connector block. This will protect the circuit in case of a fault.

 

 

[Darren]

HiIf you have the LEDs and

Hi

 

If you have the LEDs and the switches you just need the cable.

 

Below is a diagram on how to wire the 4 LEDS to use 2 switches.

 

 

Here is a description of the circuit:

1. + from the battery to a connector block (fuse first ideally)

2. Connector block splits the wire to 2 wires for each switch

3. + wires to switches, 1 switch per 2 LEDs

4. + wires to LEDS

5. – wire from LED to connector block

6. – connector block to battery –

 

I would recommend putting a fuse between the battery + and the connector block. This will protect the circuit in case of a fault.

 

 

[Darren]

HiIf you have the LEDs and

Hi

 

If you have the LEDs and the switches you just need the cable.

 

Below is a diagram on how to wire the 4 LEDS to use 2 switches.

 

 

Here is a description of the circuit:

1. + from the battery to a connector block (fuse first ideally)

2. Connector block splits the wire to 2 wires for each switch

3. + wires to switches, 1 switch per 2 LEDs

4. + wires to LEDS

5. – wire from LED to connector block

6. – connector block to battery –

 

I would recommend putting a fuse between the battery + and the connector block. This will protect the circuit in case of a fault.

 

 

[Darren]

HiIf you have the LEDs and

Hi

 

If you have the LEDs and the switches you just need the cable.

 

Below is a diagram on how to wire the 4 LEDS to use 2 switches.

 

 

Here is a description of the circuit:

1. + from the battery to a connector block (fuse first ideally)

2. Connector block splits the wire to 2 wires for each switch

3. + wires to switches, 1 switch per 2 LEDs

4. + wires to LEDS

5. – wire from LED to connector block

6. – connector block to battery –

 

I would recommend putting a fuse between the battery + and the connector block. This will protect the circuit in case of a fault.

 

 

[skiing1005]

Thanks
Thanks..good diagram..I just got all the parts..

[skiing1005]

Thanks
Thanks..good diagram..I just got all the parts..

[skiing1005]

Thanks
Thanks..good diagram..I just got all the parts..

[skiing1005]

Thanks
Thanks..good diagram..I just got all the parts..

[Bob Tett]

Led celing Lighting in a campervan
Hi Darren,
I am just about to undertake the installation of 6 LED ceiling Lights into the roof panel on my old Bedfrod.

Your wiring diagram would be very helpful. If you could send it across to me. Any help would be appreciated.

Kind regards

Bob Tett

[Bob Tett]

Led celing Lighting in a campervan
Hi Darren,
I am just about to undertake the installation of 6 LED ceiling Lights into the roof panel on my old Bedfrod.

Your wiring diagram would be very helpful. If you could send it across to me. Any help would be appreciated.

Kind regards

Bob Tett

[Bob Tett]

Led celing Lighting in a campervan
Hi Darren,
I am just about to undertake the installation of 6 LED ceiling Lights into the roof panel on my old Bedfrod.

Your wiring diagram would be very helpful. If you could send it across to me. Any help would be appreciated.

Kind regards

Bob Tett

[Bob Tett]

Led celing Lighting in a campervan
Hi Darren,
I am just about to undertake the installation of 6 LED ceiling Lights into the roof panel on my old Bedfrod.

Your wiring diagram would be very helpful. If you could send it across to me. Any help would be appreciated.

Kind regards

Bob Tett

[Paul Outten]

Re: 12v LED lighting
Sorry I can’t see the diagram for some reason, could you tell me where to find it.

[Author]

Posts