- This topic has 3 replies, 2 voices, and was last updated 11 years, 6 months ago by
.
- Posts
I am fitting a split charge relay. Can anyone tell me what type of cable is best to wire from the relay to the leisure battery and from the vehicle battery to a 12v zig unit.
Stuart
Normally one would recommend
Normally one would recommend 16mm2 cable between batteries and a relay. 16mm2 is typically the big cable you will find on the engine battery. But, you need to check the connections on the relay and the zig unit. If they will only accept 8mm cable, then use 8mm. If they will accept 16mm, then use that. If you use 16mm you’ll get better battery charging.Normally one would recommend
Normally one would recommend 16mm2 cable between batteries and a relay. 16mm2 is typically the big cable you will find on the engine battery. But, you need to check the connections on the relay and the zig unit. If they will only accept 8mm cable, then use 8mm. If they will accept 16mm, then use that. If you use 16mm you’ll get better battery charging.Normally one would recommend
Normally one would recommend 16mm2 cable between batteries and a relay. 16mm2 is typically the big cable you will find on the engine battery. But, you need to check the connections on the relay and the zig unit. If they will only accept 8mm cable, then use 8mm. If they will accept 16mm, then use that. If you use 16mm you’ll get better battery charging.
- You must be logged in to reply to this topic.